Gai-tronics CommandPLUS Series Desktop Console Installation an Bedienungsanleitung PDF herunterladen (Seite 58)

Troubleshooting CommandPLUS Series Desktop Console Installation and Service Manual

12/10 54

Problem Possible Solution

When TRANSMIT is

pressed, no transmission

takes place and the TX LED

does not light on the

selected channel.

The phone is in use. This will be indicated on the display.

A parallel transmission is occurring on the channel indicated by the

flashing BUSY LED on the channel.

The transmission of one

channel can be heard in the

receive audio.

The output level adjust diagnostic should be run. This diagnostic allows

each channel’s output level to be set for different line loads.

When a transmission is

initiated, the audio/tones

are heard and feedback is

heard.

The channel is receiving itself. The channel has been jumper-configured

for 2-wire operation and programmed for 4-wire operation with CARD

application.

Replacement Parts List

Description Part No.

ICP Main PCBA 69405-002

ICP Display PCBA 69406-001

Replacement Slave PCBA CP-CSD

DC PCBA Replacement Kit XCP0010A

Direct Telephone Interface PCBA Replacement Kit XCP0070A

External Telephone Interface PCBA Replacement Kit XCP0060A

Supervisor PCBA Replacement Kit XCP0050A

ICP Lightning Protection Board CP-CLP

Replacement Button/Elastomer Kit XCP0110A

ICP Power Supply 3308-00124-00

ICP Power Supply with Battery Revert CP-BR-PS

Internal Mic Assembly 13507-013

OTE: For availability of all other parts, please contact the GAI-Tronics Service Department.

1 2 ... 53 54 55 56 57 58 59 60 61 62

Keine Kommentare

Gai-tronics CommandPLUS Series Desktop Console Installation an Bedienungsanleitung Seite 58