Gai-tronics XCP0120A Slave Cable Assembly Replacement Kit Bedienungsanleitung PDF herunterladen

Pub. 43003-024A

Page 1 of 2

GAI-TRONICS® CORPORATION

A HUBBELL COMPANY

Model XCP0120A Slave Cable Assembly

Replacement Kit

Field Installation Kit Instructions

Confidentiality Notice

This manual is provided solely as an operational, installation, and maintenance guide and contains

sensitive business and technical information that is confidential and proprietary to GAI-Tronics.

GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,

and such information may only be used in connection with the operation of your GAI-Tronics product or

system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any

third party.

General Information

The Model XCP0120A Slave Cable Assembly Replacement Kit contains a set of ribbon cables used to

replace damaged cables within an ICP9000 Series Desktop Console.

This kit includes the following components:

Qty Description

1 SLV-CBL-M Interconnecting cable (for master PCBA to CSD PCBA)

1 SLV-CBL-P Interconnecting cable (for CSD to CLP PCBAs)

Installation

1. Disconnect the power from the ICP9000 Series Desktop Console.

2. Remove the 7 screws securing the top panel and gently lift the cover to expose the attached speaker

cable and master display cable. See Figure 1.

3. Disconnect the speaker cable at the male to female connection point. Unplug the master display cable

from the top cover. Also unplug the ESD ground wire from the front panel quick-disconnect lug.

4. The exposed cable(s) in the front is the SLV-CBL-M, going from the main PCBA to the CSD PCBA.

Remove the damaged cable from the connector plug by squeezing the metallic latch catches on the

sides and pulling.

1 2

Pub. 43003-024APage 1 of 2 GAI-TRONICS® CORPORATIONA HUBBELL COMPANYModel XCP0120A Slave Cable AssemblyReplacement KitField Installation Kit Instruct

Pub. 43003-024AModel XCP0120A Slave Cable Assembly Replacement Kit Page: 2 of 211/015. Connect the new SLV-CBL-M ribbon cable to J1 and route it und

Keine Kommentare

Gai-tronics XCP0120A Slave Cable Assembly Replacement Kit Bedienungsanleitung